Model assessment · AFMAT

AFMAT PSC5CY Cyan Corded Electric Pencil Sharpener review

The Cyan AFMAT PSC5CY is a wall-outlet sharpener with automatic pencil feed/ejection, five point settings and a manufacturer-stated 6.5–10.5 mm pencil range.

Sources checked 2026-11-05 · Our editorial approach

Review the exact model, limitations and buying checks on BuyerShortlists before choosing a seller. We may earn from qualifying purchases.

Cyan AFMAT PSC5CY corded sharpener with a transparent drawer, front pencil opening marked 6.5–10.5 mm, five-position dial and attached U.S. plug in manufacturer artwork.
Cyan PSC5CY manufacturer image; verify the exact model and seller offer. AFMAT exact Cyan PSC5CY page-selected main product image mapped to variant 40919632642112.
A useful fit for

A Cyan, corded U.S.-outlet candidate for a desk or classroom station when automatic feed/ejection, five point choices, a maker-stated 6.5–10.5 mm range and a seated-drawer condition suit the user's exact pencils.

The main tradeoff

It requires a wall outlet and AFMAT says pencils shorter than 79 mm are ejected. There is no documented completion light, dedicated anti-clog gear or broad crayon/chalk support; verify the pencil profile, unit label and seller package. Performance statements are untested maker claims.

Your needs, this model

Does it fit your priorities?

Would the Cyan PSC5CY handle an 8 mm graphite pencil at a fixed outlet station?

AFMAT's exact Cyan PSC5CY page and PSC5 manual state a 6.5–10.5 mm range and name graphite. An 8 mm answer sits within that manufacturer-stated band, but it is not a fit test of a particular shaft; AFMAT says pencils shorter than 79 mm are ejected without sharpening.

Explore this need in the finder →
Can PSC5CY sharpen away from a wall outlet?

No cordless arrangement is documented for Cyan PSC5CY. The exact page identifies a corded U.S. 120 V / 60 Hz plug, so plan around an outlet and check the delivered rating label; the 36 W entry is from the family manual, not a unit inspection.

Explore this need in the finder →
Does PSC5CY signal completion with a light?

AFMAT describes automatic feed, sharpening and ejection using a five-position sharpness dial, but the PSC5 family manual says Indicator Light: No. Pencil ejection and a completion LED are different features; no lamp is documented here.

Explore this need in the finder →
Is PSC5CY documented for crayons or chalk as well as selected soft-core pencils?

No. The exact page names selected soft-core brands and recommends blunt settings, but it does not establish crayons, chalk or the full soft/waxy mix used by this finder. Those unconfirmed media should not be treated as compatible based on the colored finish or the broad marketing headline.

Explore this need in the finder →
Does PSC5CY stop if its shavings drawer is removed?

The exact product page says the sharpener stops when the drawer is missing or not correctly seated, and the PSC5 manual repeats the seating instruction. This is manufacturer-described operation, not an independent interlock test or a substitute for correctly reinstalling the bin.

Explore this need in the finder →
Does the Cyan PSC5CY have a named anti-clog gear for colored pencils?

No consulted exact page or PSC5 manual names a dedicated anti-clog cutter gear. The manual's broken-lead clearing steps are a care procedure, not evidence of that named mechanism; its hardware remains unknown rather than proven absent.

Explore this need in the finder →

What the Cyan listing identifies

PSC5CY is the Cyan finish of AFMAT's corded PSC5 sharpener. The saved collection record identifies product 7207406403648 and selected variant 40919632642112; the exact U.S./English product page repeats the PSC5CY code and Cyan selection. That matters because the similarly named PSX5 models are rechargeable products, while the PSC5 listing calls for a U.S. wall plug. The color is an appearance choice, not evidence of a different sharpening mechanism or better performance.

The page describes a clear drawer, front pencil opening and a rotating five-position point dial. The official picture is useful for seeing the Cyan housing and visible controls, but it is manufacturer artwork, not a photo of a delivered package or proof that a particular pencil fits.

Check the pencil before choosing it

AFMAT states a 6.5–10.5 mm range and names graphite and colored pencils. Its feature text lists round, oval, triangular and hexagonal shafts, while the FAQ gives a narrower shape list that omits oval. These are manufacturer descriptions rather than an aperture measurement; a pencil's widest point, taper and core can matter. AFMAT also says pencils shorter than 79 mm are ejected without sharpening. If your routine includes short stubs or a profile the page does not clearly cover, keep a manual sharpener available rather than assuming the broad compatibility headline settles the question.

The page and PSC5 family manual describe five selectable point positions. That gives a user a way to choose a less acute or sharper result, but AFMAT does not publish numeric point angles or dimensions. Its advice for selected soft-core pencils is to use the final three, blunter settings to reduce lead breakage. That guidance is not a blanket endorsement of crayons, chalk or every waxy material, and the broad finder category intentionally does not treat it as one.

Automatic feeding is not the same as a completion light

AFMAT describes an insert-and-release routine: the sharpener draws the pencil in and returns it when the selected point is ready. The manual also describes the automatic feed/eject cycle. This can reduce how long someone needs to hold or monitor a pencil, but no independent stop test was conducted, and the page does not provide measured point geometry. The manual's specification table says there is no indicator light. A returned pencil is therefore the documented completion cue; shoppers who require a visible lamp should look elsewhere.

The drawer is a separate operating condition. AFMAT says the unit will not run if the shavings drawer is absent or incorrectly seated, and the family manual repeats the seating instruction. This is not the same thing as stopping at a pencil point, nor does the source material establish an independently tested safety mechanism. Push the drawer fully into place after emptying.

Plan for an outlet and routine emptying

The Cyan page specifies a corded U.S. plug at 120 V / 60 Hz. It does not establish a cordless mode. The PSC5 family manual lists 36 W, but that number is not repeated on this exact page; inspect the actual unit label and seller-specific package before relying on the manual figure. The manual's package list names a plug-in sharpener and a user manual, not a spare blade or a seller-audited set of accessories.

The see-through drawer makes the shavings level easier to inspect, though AFMAT gives no capacity in volume or pencil count. Its manual advises unplugging before emptying and doing so at about one-third full. It also includes a broken-lead clearing routine and instructions for replacing the cutter; the manual points readers toward an HB08 replacement blade. Confirm the exact part with AFMAT before ordering because the family manual is not a model-specific compatibility guarantee for every seller offer.

Keep performance claims in perspective

AFMAT advertises roughly three seconds for a used pencil and five for a new one, more than 500 consecutive sharpenings and a blade life exceeding 10,000 uses. The manual gives related timing and blade-life figures, but neither source supplies an independent test protocol. The page calls the motor quiet without a decibel value. These are maker claims, not results from our own use, laboratory work or a verified duty-cycle test.

AFMAT lists a 7.5 × 3.5 × 4.7 inch body and four suction cups. Treat those as published specifications, not measurements. Allow clear room around the sharpener for its cord and to pull the drawer out. A fixed outlet station is a more natural fit than a mobile classroom cart without power.

Who should consider PSC5CY

The Cyan PSC5CY is worth comparing when you want an outlet-powered machine with automatic feed/ejection, a five-position point selector and a manufacturer-stated range that covers the measured size and profile of your pencils. Its practical limits are just as important: the maker says short pencils under 79 mm are returned, there is no documented completion LED, and a dedicated anti-clog cutter gear is not named. The manual's illustrations are PSC4-like rather than exact Cyan assembly photos, and no seller-specific box or physical rating label was inspected.

Before choosing a listing, confirm the PSC5CY suffix and Cyan finish, the local power label, the actual pencil's diameter/profile and length, the drawer clearance, and the offer's included contents. A different color is not a functional substitute if its model code or package differs. This assessment does not claim hands-on use, measured sharpness, current stock, or customer experience.

Key specifications

Key details at a glance

Manufacturer SKUPSC5CY
Pencil-size controlFive-position sharpness dial; this changes the selected point rather than identifying a separate shaft-size selector.
Point-stop featureThe exact page and psc5 manual describe automatic feed, sharpening and ejection when the selected point is ready. they do not publish numeric point geometry or independent stop-test results.
Completion indicatorNone
Documented pencil mediaWoodcase graphite / Colored pencils
Stops at a sharpening pointYes
Shavings-bin safety interlockYes
Shavings binLarge (manufacturer description)
Power arrangementCorded, wall-outlet operation
Maker-stated minimum pencil diameter6.5 mm
Conservative numeric match ceiling10.5 mm
Minimum usable pencil length79 mm
Documented pencil shaft shapesround / oval / triangle / hexagonal

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this review

Sources for this assessment

Check your own needs against the model

Use the finder to apply the documented limits, then verify the exact model and package before choosing a seller.

In this review

Questions to consider for this model

Read the matching requirement, its tradeoffs and the other reviewed options.

More matching requirements
Combine my requirements →